It’s one of the most annoying household problems: a dripping faucet. Not only is it a waste of water, but that constant “drip, drip, drip” can drive you crazy! Fortunately, it’s usually a pretty easy problem to fix. In most cases, a dripping faucet is simply the result of a worn out washer. The good news is that washers are inexpensive and easy to replace. In this article, we’ll show you how to fix a leaking faucet.

Before you begin, it’s important to identify the type of faucet you have. There are two common types: compression faucets and cartridge faucets. Compression faucets have two handles, one for hot water and one for cold. They’re the most common type of faucet, and they’re usually pretty easy to fix. Cartridge faucets have a single handle that controls both the hot and cold water. These are more complicated to repair, but we’ll show you how to do it.

Once you know what type of faucet you have, follow these steps to fix a dripping faucet:

1. Turn off the water supply. Before you do anything, make sure you turn off the water supply to your sink. This will prevent any further damage to your faucet.
2. Remove the handle. The next step is to remove the handle of your faucet. This will give you access to the inner workings of the faucet.
3. Replace the washer. In most cases, a dripping faucet is simply the result of a worn out washer. To replace the washer, remove the retaining nut and then pull out the old washer. Install the new washer and then screw on the retaining nut.
4. Reassemble the faucet. Once you’ve replaced the washer, simply reassemble the faucet and turn on the water supply. Your faucet should now be fixed!

If you have a cartridge faucet, the repair process is a little more complicated. These types of faucets have a cartridge that controls the flow of water.

To fix a leaking cartridge faucet, follow these steps:

1. Turn off the water supply. As with a compression faucet, the first step is to turn off the water supply to your sink.
2. Remove the handle. Use a screwdriver to remove the handle of your faucet.
3. Remove the cartridge. Once you have access to the inner workings of the faucet, locate the cartridge and remove it.
4. Clean the area. Use a paper towel or soft cloth to clean the area around the cartridge. Be sure to remove any debris or buildup that could prevent the new cartridge from seating properly.
5. Install the new cartridge. Insert the new cartridge into the faucet and tighten the retaining nut.
6. Reassemble the faucet. Once you’ve replaced the cartridge, simply reassemble the faucet and turn on the water supply. Your faucet should now be fixed!

Fixing a dripping faucet is a pretty easy DIY project. In most cases, you can fix the problem simply by replacing a worn out washer. If you have a cartridge faucet, the repair process is a little more complicated but still relatively easy. Simply follow the steps outlined above and your faucet should be good as new!

Hope this helped better understand How to Fix a Leaky Faucet? Thanks for visiting Local Handy Man Tulsa Ok!

Send us an email by clicking here – Contact Us

Today sponsor: Mailbox Repair Tulsa “Quality Mailboxes”